| 李岩,刘艳华,戴峻.基于ABAQUS的稳定杆和卡箍有限元分析[J].汽车零部件,2014,8(6):52-54 |
| 基于ABAQUS的稳定杆和卡箍有限元分析 |
|
| |
| DOI： |
| 中文关键词: 稳定杆 卡箍 衬套 有限元分析 |
| 英文关键词: Stabilizer Clamp Bushing Finite Element Analysis |
| 基金项目: |
|
| 摘要点击次数: 1524 |
| 全文下载次数: 0 |
| 中文摘要: |
| 建立了带有衬套的稳定杆安装总成的有限元模型，精确地模拟了稳定杆和卡箍的受力情况。结合实车路试，找出稳定杆卡箍圆角处开裂的原因。同时对比了联合仿真和各部件单独仿真分析方法的优劣性，对比结果对工程应用具有指导意义。 |
| 英文摘要: |
| The finite element model of the stabilizer mounting assembly with bushing and clamp was established. The force situations of stabilizer and clamp were accurately simulated. Combining with real vehicle road test, the cause of clamp cracking on fillet was identified. At the same time, combined simulation and simulation of various components individually were compared. The results are instructive for engineering applications. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
